Kyocera C8100DN Command Center Guide - Page 39
Advanced > Protocols > TCP/IP > General, TCP/IP > General, Description, Host Name
View all Kyocera C8100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
COMMAND CENTER Pages - TCP/IP - Netware - IPP - AppleTalk - NetBEUI - SMTP - POP3 - SNMP v1/v2 - SNMPv3 - LDAP - SSL - IPSec - IEEE802.1x Advanced > Protocols > TCP/IP > General The table below provides a summary of the items displayed on the TCP/IP > General page. Item Description Host Name IPv4 Settings DHCP/ BOOTP Specifies a name for the printing system network component. This name is also used as the NetBEUI printer name. Specifies whether or not to automatically obtain an IP address using DHCP or BOOTP. IP Address Subnet Mask Assigns an IPv4 address to the printing system network component. The format of the IPv4 address is a sequence of numbers (32-bit in total) separated by dots, e.g. 192.168.110.171. Specifies the subnet mask. Default Gateway Specifies the IP address of the default gateway. Domain Name Specifies the DNS (Domain Name System) name of the domain to which the printing system belongs. It should not contain the host printer name, as in kyoceramita.co.jp. DNS Server (Primary, Secondary) Specifies the IP addresses of the primary and secondary DNS (Domain Name System) servers. When DHCP/BOOTP is turned On, you can select to use either the DNS servers obtained via DHCP or the DNS servers being set under this item. WINS Server (Primary, Secondary) Specifies the IP addresses of the primary and secondary WINS (Windows Internet Name Service) servers. When DHCP/BOOTP is turned On, you can select to use either the WINS server obtained via DHCP or the WINS server being set under this item. Operation Guide 35