Kyocera C8100DN Command Center Guide - Page 17

COMMAND CENTER Pages Basic > Security > Device Security > Interface Block This page allows you to restrict access from each interface. Item Network USB Device USB Host Parallel I/F Optional I/F Description Specifies whether or not to restrict access from each of the interfaces on the left. Access from the interfaces that are set to Block is restricted. Access from the network interface cannot be restricted. Access can be restricted on a per-protocol basis. Refer to the next section. Basic > Security > Device Security > Network Security This allows you to enable communication with the printing system on a per-protocol basis. Item Description SNMP v3, NetWare, AppleTalk, NetBEUI, Raw, IPP, IPP over SSL, HTTP, HTTPS, FTP (Transmission), FTP (Reception), SMB, SNMP, SMTP, POP3, LPD, LDAP, WSD Print, WSD Scan Specifies whether or not to restrict communication via each of the protocols on the left. The communication via the protocols that are set to Lock is restricted. The settings made on this page affect the protocol settings on the Advanced page. Basic > Security > User Login When the authentication function is set on the Advanced > Management > Authentication page (Local Authentication, depending on model), you must register users and set access levels on this page.The available access levels are User and Administrator. One administrator account is registered by default. Adding a New User Login 1. Open the User Login page. 2. Click Add and enter the information of the user. 3. Click Submit. Operation Guide 13