Kyocera C8100DN Command Center Guide - Page 40
Advanced > Protocols > TCP/IP > IP Filters, Bonjour, IPv6 Settings, IP Address, Prefix
View all Kyocera C8100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
COMMAND CENTER Pages Item Description Bonjour Bonjour Name Specifies whether or not to automatically obtain an IP address using Bonjour. You can add a Bonjour printer from the Print Center of Mac OS X. When using a Windows operating system, you can use the Bonjour Printer Wizard to add a printer. The following conditions must be satisfied to automatically obtain an IP address using Bonjour: If DHCP/BOOTP is turned Off, an IP address should not be specified. If DHCP/ BOOTP is turned On, automatic IP address assignment by the DHCP server should not be enabled. To allow printing from the Mac OS X system, the printer needs to support KPDL. If Bonjour is turned On, this specifies the Bonjour name to be used. IPv6 Settings IPv6 Specifies whether or not to enable the IPv6 protocol. Select On to use the IPv6 protocol. IP Address Assigns an IPv6 address to the printing system network component. The format of the IPv6 address is a sequence of numbers (128 bit in total) separated by colons, e.g. 2001:db8:3c4d:15::1a2c:1a1f. Prefix Length Specifies the IPv6 prefix length. It can be a decimal value between 0 and 128. RA Select On to use RA instead of the DHCP server to (Stateless) configure IPv6 addresses. Default Gateway Specifies the IPv6 address of the default gateway. DHCPv6 (Stateful) Domain Name Specifies whether or not to obtain IPv6 IP addresses by automatic configuration. When RA is turned On, the IP addresses and server information are obtained via DHCPv6 based on the settings of the automatic configuration made under RA (router setting). Specifies the DNS (Domain Name System) name of the domain to which the printing system belongs. DNS Servers (Primary, Secondary) Specifies the IP addresses of the primary and secondary DNS (Domain Name System) servers. When DHCPv6 (Stateful) is turned On, you can select to use either the DNS servers obtained via DHCP or the DNS servers being set under this item. Advanced > Protocols > TCP/IP > IP Filters This page allows you to configure IP filters. IP filters restrict access to the printing system based on the IP addresses and protocols. Specify the IP addresses or network addresses of the hosts to which access is granted. 36 KYOCERA COMMAND CENTER