Kyocera C8100DN Command Center Guide - Page 24

COMMAND CENTER Pages Scanner > SMB The table below provides a summary of the items displayed on the SMB page. Item SMB Protocol SMB Port Number Description Switches the SMB Protocol On or Off. Set the SMB default Port Number or use the SMB default port 445. Scanner > E-mail The table below provides a summary of the items displayed on the E-mail page. Item Subject Body Description You can include the model name of the printer, serial number, MAC address, host name and IP address in the subject line as follows: Enter one of the following conversion strings starting with %. The string will be converted into a pre-defined string to display the above information. - %printer = Model - %serial = Serial Number - %etheraddr = MAC Address - %host = Host Name - %ip = IP Address You can enter the information that you want to appear in the body of the E-mail. Scanner > i-FAX This sends scanned data in i-FAX mode. The subject and body contents for i-FAX must be specified. The contents displayed on this page are the same as in Scanner > E-mail, described above. FAX / i-FAX Page This section includes settings, such as FAX transmission and reception settings, that apply to the FAX function of the device. FAX / i-FAX > Common > Defaults The table below provides a summary of the items displayed on the FAX / i-FAX > Common page. Item Description Local FAX Name Specifies your FAX system name. 20 KYOCERA COMMAND CENTER