Kyocera C8100DN Command Center Guide - Page 42
Advanced > Protocols > Netware, Start of Job
View all Kyocera C8100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
COMMAND CENTER Pages Each logical printer can be used with either the FTP, LPR, IPP, NetBEUI, or Raw Port protocol. All printout to a non-existent port will be accomplished to Logical Printer1. Item TCP/IP Port Number Bi-directional Printing Start of Job String End of Job String Description Specifies the port number for the logical printer as well as the TCP raw port number (9100, etc.). Conversion is applied to data that is input to the specified raw port in accordance with the selected logical printer. This port is invalid if it is given a port number that is the same as that of an already specified port (e.g. FTP or LPD). On or Off Bi-directional Printing using the TCP/IP raw port. With this setting Off, all send data are discarded. In order to have the data that is received from the printer returned to the client when printing with PostScript, PJL and other such commands, it is necessary to On bi-directional printing. Specifies the character string sent to the printer before output directly to the output port (lp port). Specifies the character string if it is necessary to transmit the control code before printing. Specifies the character string sent to the printer after directly outputting to the output port (lp port). Specify a character string, if it is necessary, to send a control code after printing. Advanced > Protocols > Netware This printing system supports both NDS and bindery printing in either print server mode or remote printer mode. NetWare setup requires installation of the following client software and logon with Administrator Privileges. If you are unsure, please contact your network administrator. With Novell Client, creation of the NetWare print objects with the AdminManager NetWare Setup Wizard requires the NetWare Client from Novell. For NetWare printing, you may use the NetWare Client from either Novell or Microsoft. For Admin Privileges, network operations (creating queues etc.) require 'admin' or 'supervisor' privileges (or equivalent). Certain portions of AdminManager may be inoperable if you attempt those operations without sufficient privileges. Item NetWare Protocol Bindery Mode Frame Type File Server (Primary) NDS Tree Description Enables or disables the Network Protocol. Enables or disables Bindery Mode. Sets the Frame type. You can choose from Auto, 802.3, Ethernet-II, SNAP or 802.2. Enter the name of the primary File Server. Enter the name of the NDS Tree. 38 KYOCERA COMMAND CENTER