LG LGVS910 Owner's Manual - Page 18
Installing the Battery and microSD Card
View all LG LGVS910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
16 The Basics Installing the Battery and microSD Card NOTE It is important to fully charge the battery before initial use of the phone. Installing the battery The phone comes with a rechargeable battery. Keep the battery charged while not in use in order to maximize talk, use, and standby time. The battery charge level is shown at the top right corner of the screen. 1 Hold the phone with both hands, with the microphone facing upward. Then use the fingertip cutout to pull open the back cover (as shown above). 2 Align the battery contacts with the terminals at the bottom of the battery compartment, then press the battery into place. 3 Replace the battery cover over the back of the phone (as demonstrated). Apply a steady downward pressure until the back cover clicks into place. Removing the battery Turn the power off. Remove the battery cover (as demonstrated in the previous instructions). Then flip the phone to its normal position and use the fingertip cutout at the top left corner of the battery compartment to lift the battery out. Inserting a microSD card Turn the power off. Remove the battery cover and the battery (as demonstrated in the previous instructions). Locate the microSD card slot (microSD is inscribed near the slot opening). Position the microSD card with the label side facing up and slide it into place until it is fully inserted and locked in place.