Lenovo PC 300PL Installing Options in your PC - 6862, 6275 - Page 65
Removing the Metal Shield, To rotate the drive cage up and rest it on the power supply
View all Lenovo PC 300PL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Removing the Metal Shield Note: Your computer might not be equipped with metal shields. 1 Have the front of the computer facing you. 2 Push in the tabs on the sides of the metal shield until it flexes. 3 Lift off one side, then the other. Note: You might need to remove the shield from bay 1 to get to the shield covering bay 2. What to do next To remove a bay panel, go to "Removing a Bay Panel" on page 52. To rotate the drive cage up and rest it on the power supply, go to "Rotating the Drive Cage" on page 54. To install a drive, go to "Installing a Drive in Bay 1, 2, or 3" on page 56. To remove a drive, go to "Removing a Drive from Bay 1, 2, or 3" on page 59. Chapter 5. Working with Internal Drives 51
Removing the Metal Shield
Note:
Your computer might not be equipped with metal shields.
1
Have the front of the computer facing you.
2
Push in the tabs on the sides of the metal shield until it flexes.
3
Lift off one side, then the other.
Note:
You might need to remove the shield from bay 1 to get to the shield
covering bay 2.
What to do next
±
To remove a bay panel, go to “Removing a Bay Panel” on page
52.
±
To rotate the drive cage up and rest it on the power supply, go to “Rotating
the Drive Cage” on page
54.
±
To install a drive, go to “Installing a Drive in Bay 1, 2, or 3” on page
56.
±
To remove a drive, go to “Removing a Drive from Bay 1, 2, or 3” on
page 59.
Chapter
5.
Working with Internal Drives
51