Lenovo PC 300PL Installing Options in your PC - 6862, 6275 - Page 76
Working With Drives in Bay 4
View all Lenovo PC 300PL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Working With Drives in Bay 4 This section discusses removing and installing a drive in bay 4. Normally, the diskette drive is installed in bay 4. Removing a Drive from Bay 4 If you remove a drive that has removable media and you do not intend to install a new drive immediately, replace the bay panel and the metal shield. Before you begin Read "Electrical Safety" on page 4 and "Handling Static-Sensitive Devices" on page 5. Turn off the computer and all other connected devices. Disconnect all cables attached to the computer and remove the computer cover (see "Disconnecting Cables and Removing the Cover" on page 6). 1 Loosen and remove the screw from the top of the diskette drive bracket, and disconnect the power and signal cables. 2 Slide the drive and bracket forward and out of the computer. Bay 4 62 Installing Options in Your Personal Computer