Lenovo Storage N3310 (English) User Guide and Hardware Maintenance Manual - Le - Page 106
have to restart the storage product for the newly installed solid-state drive to be recognized. See
View all Lenovo Storage N3310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
8. Align the screw holes in the drive adapter and the solid-state drive with the corresponding holes in the drive bracket. Then, install the five screws to secure the drive adapter and the solid-state drive to the bracket. Figure 68. Installing the screws to secure the drive adapter and the solid-state drive to the bracket 9. Slide the bracket with the solid-state drive into the drive bay from the front until it snaps into position and then completely close the handle. Figure 69. Installing the bracket with the solid-state drive 10. Check the drive status LEDs to ensure that the solid-state drive is operating correctly. You might have to restart the storage product for the newly installed solid-state drive to be recognized. See "Hot-swap-drive status LEDs" on page 27. If the solid-state drive is faulty, reinstall or replace it until it is operating correctly. 11. Save the removed dummy hard-disk-drive tray in case that you later remove the solid-state drive and need a dummy tray to cover the drive bay. What to do next: • To work with another piece of hardware, go to the appropriate section. • To configure RAID, go to "Configuring RAID" on page 38. 92 Lenovo Storage N3310 User Guide and Hardware Maintenance Manual