Lenovo Storage N3310 (English) User Guide and Hardware Maintenance Manual - Le - Page 36
Hot-swap-drive backplane, Used to connect 3.5-inch drives.
View all Lenovo Storage N3310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
The following illustration shows the connectors on the ThinkServer RAID 710 Adapter. Figure 6. ThinkServer RAID 710 Adapter 1 Port 1 Used to connect a mini-SAS signal cable to the mini-SAS ports 0-3 on the backplane. 2 ThinkServer RAID Super Capacitor Module connector Used to connect the cable of a ThinkServer RAID Super Capacitor Module. To install or remove the RAID card, refer to "Installing or removing a PCIe card" on page 62. Hot-swap-drive backplane The following illustrations show the slots and connectors on the backplane for 3.5-inch drives. Figure 7. Front view of the backplane for 3.5-inch drives Figure 8. Rear view of the backplane for 3.5-inch drives 0 - 3 Slot 0-slot 3 Used to connect 3.5-inch drives. 4 10-pin power connector Used to connect to the backplane power connector on the system board to provide power to the backplane. 5 Optical drive power connector 22 Lenovo Storage N3310 User Guide and Hardware Maintenance Manual