Lenovo Storage N3310 (English) User Guide and Hardware Maintenance Manual - Le - Page 81
Installing or removing the optical module
View all Lenovo Storage N3310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
What to do next: • To work with another piece of hardware, go to the appropriate section. • To complete the removal procedure, go to "Completing the parts replacement" on page 112. Installing or removing the optical module The optical module enables you to connect two network devices with optical fiber cables. The optical module is needed only on some PCIe cards. Note: The optical module is extremely sensitive to ESD. Ensure that you read and understand "Handling static-sensitive devices" on page 42 first and carefully perform the operation. Installing the optical module Attention: Do not open your storage product or attempt any repair before reading and understanding "Safety information" on page iii and "Guidelines" on page 41. Before you begin, print all the related instructions or ensure that you can view the PDF version on another computer for reference. Notes: • The optical module and the PCIe card might look different from the illustration in this topic. • Before you install the optical module, ensure that the PCIe card that requires the optical module is installed in the storage product. See "Installing a PCIe card" on page 63. To install the optical module, do the following: 1. Locate the two holes at the rear of the PCIe card for installing the optical module. 2. Touch the static-protective package that contains the optical module to any unpainted surface on the outside of the storage product. Then, take the optical module out of the package. 3. With the optical module handle in the open position, insert the optical module into one of the two holes in the PCIe card. Figure 36. Installing the optical module Chapter 6. Replacing hardware 67