Lenovo ThinkServer RD240 MegaRAID SAS Software User Guide - Page 180

Table 5.8 Display Specified Controller Properties Convention Description MegaCli -AdpGetProp CacheFlushInterval | RebuildRate | PatrolReadRate| BgiRate | CCRate | ReconRate | SpinupDriveCount | SpinupDelay | CoercionMode | PredFailPollInterval | ClusterEnable | BatWarnDsbl | EccBucketSize | EccBucketLeakRate | EccBucketCount | AlarmDsply | AbortCCOnError | AutoDetectBackPlaneDsbl | CopyBackDsbl | LoadBalanceMode | SMARTCpyBkEnbl | SSDSMARTCpyBkEnbl | MaintainPdFailHistoryEnbl | EnblSpinDownUnConfigDrvs | EnblSSDPatrolRead | NCQDsply | UseFDEOnlyEncrypt | WBSupport | AutoEnhancedImportDsply | PrCorrectUncfgdAreas -aN| -a0,1,2|-aALL Displays the properties on the selected controller(s). EccBucketCount: Count of single-bit ECC errors currently in the bucket. See Table 5.7 for explanations of the other options. 5.4.7 Set Factory Defaults Use the command in Table 5.9 to set the factory defaults on the selected controller(s). Table 5.9 Set Factory Defaults Convention Description MegaCli -AdpFacDefSet -aN|-a0,1,2|-aALL Sets the factory defaults on the selected controller(s). 5.4.8 Set SAS Address Use the command in Table 5.10 to set the SAS address on the selected controller(s). Table 5.10 Set SAS Address on Controller Convention Description MegaCli -AdpSetSASA str[0-64] -aN Sets the controllers SAS address. This string must be a 64-digit hexadecimal number. 5.4.9 Set Time and Date on Controller Use the command in Table 5.11 to set the time and date on the selected controller(s). 5-10 MegaRAID Command Tool