Lenovo ThinkServer RD240 MegaRAID SAS Software User Guide - Page 186
Display BBU Design Parameters, 5.7.5 Display Current BBU Properties, Table 5.19
View all Lenovo ThinkServer RD240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
Table 5.19 Display BBU Capacity Information Convention Description MegaCli -AdpBbuCmd -GetBbuCapacityInfo -aN|-a0,1,2|-aALL Displays BBU capacity information. The information displays in the following format: BBU Capacity Info for Adapter: x Relative State of Charge: xx% Absolute State of Charge: xx% Remaining Capacity: xx mAh Full Charge Capacity: xx mAh Run Time to Empty: xxx Min Average Time to Empty: xxx Min Average Time to Full: xxx Min Cycle Count: xx Max Error: xx% 5.7.4 Display BBU Design Parameters Use the command in Table 5.20 to display BBU design parameters for the selected controller(s). Table 5.20 Display BBU Design Parameters Convention Description MegaCli -AdpBbuCmd -GetBbuDesignInfo -aN|-a0,1,2|-aALL Displays information about the BBU design parameters. The information displays in the following formats: BBU Design Info for Adapter: x Date of Manufacture: mm/dd, yyyy Design Capacity: xxx mAh Design Voltage: mV Serial Number: 0xhhhh Pack Stat Configuration: 0xhhhh Manufacture Name: XXXXXX(String) Device Name: XXXXXX(String) Device Chemistry: XXXXXX(String) 5.7.5 Display Current BBU Properties Use the command in Table 5.21 to display the current BBU properties for the selected controller(s). 5-16 MegaRAID Command Tool