Lenovo ThinkServer RD240 MegaRAID SAS Software User Guide - Page 285

import the drives, you must provide the security key used to secure them. If the drives are locked and the controller security is disabled, you cannot import the foreign drives. Only unlocked drives can be imported. Verify whether any drives are left to import as the locked drives can use different security keys. If there are any drives left, repeat the import process for the remaining drives. Once all the drives are imported, there is no configuration to import. Note: When you create a new configuration, MSM shows only the unconfigured drives. Drives that have existing configurations, including foreign configurations, will not appear. To use drives with existing configurations, you must first clear the configuration on those drives. Perform the following steps to import or clear a configuration. 1. Enable drive security to allow importation of locked foreign drives. See Section 8.2.1, "Enabling Drive Security" for the procedure used to enable drive security. 2. After you create a security key, right-click on the controller and click Scan for Foreign Configuration. If there are locked drives (security is enabled), the Unlock foreign drives dialog box appears. 3. Enter the security key and unlock the configuration. The The Foreign Configuration Detected screen appears, as shown in Figure 8.27. Selecting Full Disk Encryption Security Options 8-33