Lenovo ThinkServer RD240 MegaRAID SAS Software User Guide - Page 73

3.4.2.1 Change the Security Key Identifier You have the option to edit the security key identifier. If you plan to change the security key, it is highly recommended that you change the security key identifier. Otherwise, you will not be able to differentiate between the security keys. You can select whether you want to keep the current security key identifier or enter a new one. To change the security key identifier, enter a new security key identifier. 3.4.2.2 Change the Security Key You can choose to keep the current security key or enter a new one. To change the security key, you can either enter the new security key or accept the security key that the controller suggests. 3.4.2.3 Add or Change the Pass Phrase You have the option to add a pass phrase or change the existing one. To change the pass phrase, enter the new pass phrase. To keep the existing pass phrase, enter the current pass phrase. If you choose this option, you must enter the pass phrase whenever you boot your server. This procedure updates the existing configuration on the controller to use the new security settings. 3.4.3 Create Secure Virtual Drives You can create a secure virtual drive and set their parameters as desired. To create a secure virtual drive, select a configuration method. You can select either simple configuration or advanced configuration. 3.4.3.1 Simple Configuration If you select simple configuration, select the redundancy type and drive security method to use for the drive group. See Section 8.1.2, "Creating a Virtual Drive Using Simple Configuration" for the procedures used to select the redundancy type and drive security method for a configuration. Workflow 3-5