Lenovo ThinkServer RD240 MegaRAID SAS Software User Guide - Page 198

5.10.5 Manage a Consistency Check Use the command in Table 5.40 to manage a data consistency check (CC) on the virtual drives for the selected controller(s). Table 5.40 Manage Consistency Check Convention Description MegaCli -LDCC -Start|-Abort|-ShowProg|-ProgDsply -Lx|-L0,1,2|-Lall -aN|-a0,1,2|-aALL Allows you to select the following actions for a data CC: -Start: Starts a CC on the virtual drive(s), then displays the progress (optional) and time remaining. -Abort: Aborts an ongoing CC on the virtual drive(s). -ShowProg: Displays a snapshot of an ongoing CC. -ProgDsply: Displays ongoing CC progress. The progress displays until at least one CC is completed or a key is pressed. 5.10.6 Manage a Background Initialization Use the command in Table 5.41 to enable, disable, or suspend background initialization (BGI), as well as display initialization progress on the selected controller(s). Table 5.41 Manage Background Initialization Convention Description MegaCli -LDBI -Enbl|-Dsbl|GetSetting|-ShowProg|-ProgDsply -Lx|- L0,1,2|-Lall -aN|-a0,1,2|-aALL Manages background initialization options. The following are the background initialization settings you can select on a single controller, multiple controllers, or all controllers: -Enbl, -Dsbl: Enables or disables the background initialization on the selected controller(s). -ProgDsply: Displays an ongoing background initialization in a loop. This function completes only when all background initialization processes complete or you press a key to exit. -ShowProg: Displays the current progress value. - GetSetting: Displays current background initialization setting (Enabled or Disabled). 5-28 MegaRAID Command Tool