Lenovo ThinkServer RD240 MegaRAID SAS Software User Guide - Page 181
Display Time and Date on Controller, 5.5 Patrol Read-Related Controller Properties
View all Lenovo ThinkServer RD240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
Table 5.11 Set Time and Date on Controller Convention Description MegaCli -AdpSetTime yyyymmdd HH:mm:ss -aN|-a0,1,2|-aALL Sets the time and date on the controller. This command uses a 24-hour format. For example, 7 p.m. displays as 19:00:00. The order of date and time is reversible. 5.4.10 Display Time and Date on Controller Use the command in Table 5.12 to display the time and date on the selected controller(s). Table 5.12 Display Time and Date on Controller Convention Description MegaCli -AdpGetTime -aN Displays the time and date on the controller. This command uses a 24-hour format. For example, 7 p.m. would display as 19:00:00. 5.5 Patrol Read-Related Controller Properties You can use the commands in this section to select the settings for Patrol Read. A Patrol Read scans the system for possible drive errors that could lead to drive failure, then takes action to correct the errors. The goal is to protect data integrity by detecting drive failure before the failure can damage data. The corrective actions depend on the virtual drive configuration and the type of errors. Patrol Read affects performance; the more iterations there are, the greater the impact. 5.5.1 Set Patrol Read Options Use the command in Table 5.13 on the selected controller(s) to set the Patrol Read options. Patrol Read-Related Controller Properties 5-11