Lexmark Forms Printer 2400 Service Manual - Page 33
Paper Select Sensor, Service Check on Paper Feed Service, Check on Action
![]() |
View all Lexmark Forms Printer 2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
24xx FRU Action 1 Paper Select Sensor With the paper select lever in the cut sheet position, do the following: • Try to load a cut sheet with Load/Unload. (This button should not work) • If paper loads, go to "Paper Select Sensor Service Check" on page 2-25. 2 Paper Feed If the paper does not feed, do the following: • Remove the ASF. • Be sure the base printer feeds paper correctly. • If the base printer does not feed paper correctly, go to "Paper Feed Service Check" on page 2-23. 3 Gear Train Be sure the ASF drive gear on the inside right side frame of the printer rotates. Inspect the right side gear train for damage or debris. Remove the ASF right cover and ensure that all the gears are in good condition. 4 Combination Lock Install the ASF and press FormFeed. Mechanism If the picker drive shaft does not rotate, replace the combination lock mechanism. 5 Left and Right Hoppers If the ASF picker rollers rotate but a single sheet is not picked, inspect the springs and corner separators on the left and right hoppers. Be sure the paper load lever is in the correct position. Diagnostic Information 2-15
![](/manual_guide/products/lexmark-forms-printer-2400-service-manual-abdd3e3/33.png)