Lexmark Forms Printer 2400 Service Manual - Page 46
Print Speed Service Check, printhead on 249x printers and protects the printhead
![]() |
View all Lexmark Forms Printer 2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
24xx FRU 6 Logic Board Action If no problem is found with the other components, but the power problem still remains, replace the logic board and reset "Bidirectional Print Adjustment" on page 4-4. Print Speed Service Check The speed of the 24xx printers varies with the font, forms thickness setting and printhead temperature. Graphics output may print slowly due to data throughput limitations. Thermal sensing is built into the printhead on 249x printers and protects the printhead from overheating. FRU Action 1 Head Gap Sensor Check the function of the head gap sensor by turning the printer on with the Macro button pressed. Open the operator panel to the second level and do the following: • With the forms thickness lever at 1, Macro LED 1 lights. • With the forms thickness lever at 2 and 3, Macro LED 2 lights. • With the forms thickness lever at 4 through 7, Macro LED 3 lights. Disconnect the head gap sensor from connector CN4 on the logic board. Place the forms thickness lever in position 1 and verify continuity at the following pin locations: CN4 - 1 and CN4 - 2 CN4 - 2 and CN4 - 3 Place the forms thickness lever in positions 2 and 3 and verify continuity at the following pin location: CN4 - 1 and CN4 - 2 Verify no continuity at forms thickness lever positions 4 through 7. 2-28 Service Manual
![](/manual_guide/products/lexmark-forms-printer-2400-service-manual-abdd3e3/46.png)