Lexmark Forms Printer 2400 Service Manual - Page 63
clockwise, until a gap of within 0.33 and 0.37 mm, slowly adjust the right gap adjust
View all Lexmark Forms Printer 2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
24xx 8. Using a feeler gauge [1], slowly adjust the left gap adjust bushing [2] counterclockwise, until a gap of (within 0.33 and 0.37 mm) exists between the printhead [3] and the platen. 9. Move the printhead to the right edge of the rubber on the platen and using a feeler gauge [1], slowly adjust the right gap adjust bushing [2] clockwise, until a gap of (within 0.33 and 0.37 mm) exists between the printhead [3] and the platen. 10. After adjusting both left and right gap adjust bushings, push the printhead to the center of the platen and verify a gap of within (0.33 and 0.37 mm) exists between the printhead and the platen. Repair Information 4-3
Repair Information
4-3
24xx
8.
Using a feeler gauge [
1
], slowly adjust the left gap adjust
bushing [
2
] counterclockwise, until a gap of (within 0.33 and
0.37 mm) exists between the printhead [
3
] and the platen.
9.
Move the printhead to the right edge of the rubber on the platen
and using a feeler gauge [
1
], slowly adjust the right gap adjust
bushing [
2
] clockwise, until a gap of (within 0.33 and 0.37 mm)
exists between the printhead [
3
] and the platen.
10.
After adjusting both left and right gap adjust bushings, push the
printhead to the center of the platen and verify a gap of within
(0.33 and 0.37 mm) exists between the printhead and the
platen.