Lexmark Forms Printer 2400 Service Manual - Page 57
Print Test, Line Feed, Start
![]() |
View all Lexmark Forms Printer 2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
24xx Print Test The print test helps you test and troubleshoot the printer. To start the print test: 1. Paper must be at the print position; test does not print if paper is parked. 2. Press and hold Line Feed and turn the printer on. 3. Release Line Feed when the printing starts. 4. To interrupt the printer test: a. Press Start/Stop. The test stops after a complete line of characters prints. b. Press Start/Stop to continue the test sample. 5. To stop the printer test, turn the printer off. If the print test fails, go to "Start" on page 2-1. Note: The short horizontal lines at the top of the sample are a test of each printhead wire numbered in sequence, from top to bottom. Diagnostic Aids 3-3
![](/manual_guide/products/lexmark-forms-printer-2400-service-manual-abdd3e3/57.png)
Diagnostic Aids
3-3
24xx
Print Test
The print test helps you test and troubleshoot the printer. To start the
print test:
1.
Paper must be at the print position; test does not print if paper is
parked.
2.
Press and hold
Line Feed
and turn the printer on.
3. Release
Line Feed
when the printing starts.
4.
To interrupt the printer test:
a. Press
Start
/
Stop
. The test stops after a complete line of
characters prints.
b. Press
Start
/
Stop
to continue the test sample.
5.
To stop the printer test, turn the printer off.
If the print test fails, go to
“Start” on page 2-1
.
Note:
The short horizontal lines at the top of the sample are a test
of each printhead wire numbered in sequence, from top to bottom.