Lexmark Forms Printer 2400 Service Manual - Page 49
Pull Tractor Sensor Service Check, load/unload from functioning
![]() |
View all Lexmark Forms Printer 2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
24xx Pull Tractor Sensor Service Check The pull tractor sensor detects the tractor in the pull position and disables load/unload and auto tear-off. A failed sensor may prevent load/unload from functioning, with the tractor in the push position. FRU 1 Pull Tractor Sensor Action With the tractor in the push position, press Load/Unload several times while alternately holding down and releasing the left pull tractor actuator. The paper should load and unload when the actuator is not held down, and should not load or unload when the pull tractor actuator is held down. If the paper does not move correctly, disconnect CN3 from the logic board.There should be continuity from CN3-1 and CN3-2 when the left pull tractor actuator is pressed, and infinite resistance when the actuator is not pressed. Replace the sensor if necessary. If the sensor is good but the paper still does not move correctly, replace the logic board and reset the "Bidirectional Print Adjustment" on page 4-4. Diagnostic Information 2-31
![](/manual_guide/products/lexmark-forms-printer-2400-service-manual-abdd3e3/49.png)