Lexmark Forms Printer 2400 Service Manual - Page 53
Beeps and Tractor 2 LED blinks 3 times, Board/Cable Asm.
![]() |
View all Lexmark Forms Printer 2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
24xx 3 Beeps and Tractor 2 LED blinks 3 times Tractor 2 selected from operator panel but printer does not detect Tractor 2 or detects that the Tractor 2 mechanism is not installed. FRU Action 1 Tractor 2 Check the Tractor 2 in-place sensor or the Board/Cable Asm. cable connection. The in-place sensor actuator extends through the Tractor 2 cover and rests on the printer cover when Tractor 2 is installed. Remove the Tractor 2 cover and be sure the inplace sensor opens when the Tractor 2 is installed. The voltage at Tractor 2 CN1-13 should be +5 V dc with the sensor open and 0 with it closed. Replace the Tractor 2 board/cable assembly if the sensor signal is wrong. For information on the Tractor 2 cable connectors, see "Tractor 2 Cable Connectors" on page 5-26. 2 Logic Board Check the cable connection from Tractor 2 to the printer. If possible, try the Tractor 2 with another printer to determine if the problem is the Tractor 2 board/cable assembly or the printer logic board. Diagnostic Information 2-35
![](/manual_guide/products/lexmark-forms-printer-2400-service-manual-abdd3e3/53.png)