Lexmark MS811 User's Guide - Page 170

Using MS812de 170 Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Copy Printer Settings. 3 To change the language, select a language from the drop‑down menu, and then click Click here to submit language. 4 Click Printer Settings. 5 Type the IP addresses of the source and target printers. Note: If you want to add or remove target printers, then click Add Target IP or Remove Target IP. 6 Click Copy Printer Settings. Printing a menu settings page From the home screen, navigate to: > Reports > Menu Settings Page Printing a network setup page If the printer is attached to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration. 1 From the home screen, navigate to: > Reports > Network Setup Page 2 Check the first section of the network setup page and confirm that the status is Connected. If the status is Not Connected, then the LAN drop may not be active, or the network cable may be malfunctioning. Consult your system support person for a solution, and then print another network setup page. Checking the status of parts and supplies A message appears on the printer display when a replacement supply item is needed or when maintenance is required. Notes: • Each gauge displays the estimated life left for the supply or part. • All page life estimates for supplies assume printing on a single side of letter‑ or A4‑size plain paper. Checking the status of parts and supplies on the printer control panel From the home screen, navigate to: Status/Supplies > View Supplies