Lexmark MS811 User's Guide - Page 178
Finding printer security information, Support & Downloads
View all Lexmark MS811 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Using MS812de 178 Notes: • Enabling disk encryption will erase the contents of the printer hard disk. • Disk encryption can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks. 4 Click Submit. Using the printer control panel 1 Turn off the printer. 2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears. The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully turned on, a list of functions appears on the printer display. 3 Touch Disk Encryption > Enable. Note: Enabling disk encryption will erase the contents of the printer hard disk. 4 Touch Yes to proceed with disk wiping. Notes: • Do not turn off the printer during the encryption process. Doing so may result in loss of data. • Disk encryption can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks. • A status bar will indicate the progress of the disk wiping task. After the disk has been encrypted, the printer will return to the Enable/Disable screen. 5 Touch Back > Exit Config Menu. The printer will perform a power‑on reset, and then return to normal operating mode. Finding printer security information In high-security environments, it may be necessary to take additional steps to make sure that confidential data stored in the printer cannot be accessed. For more information, visit the Lexmark security Web page and see the Embedded Web Server Administrator's Guide. 1 Go to http://support.lexmark.com, and then navigate to: Support & Downloads > Tech Library > Manuals & Guides 2 Type Embedded Web Server in the keyword field, and then click Filter. 3 Click Embedded Web Server to launch the document.