Lexmark MS811 User's Guide - Page 296

Troubleshooting 296 3 Remove the specified bins. 4 Reattach the bins. 5 Connect the power cord to a properly grounded electrical outlet. 6 Turn the printer back on. • Remove the specified bins: 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the specified bins. 4 Contact customer support. Select Continue on the printer control panel to clear the message and print without using the specified bins. For non-touch-screen printer models, press to confirm. Reinstall missing or unresponsive cartridge [31.xy] Try one or more of the following: • Check if the toner cartridge is missing. If missing, install the toner cartridge. For information on installing the cartridge, see the "Replacing supplies" section of the User's Guide. • If the toner cartridge is installed, then remove the unresponsive toner cartridge, and then reinstall it. Note: If the message appears after reinstalling the supply, then the cartridge is defective. Replace the toner cartridge. Reinstall missing or unresponsive fuser [31.xy] Try one or more of the following: • Remove the unresponsive fuser, and then reinstall it. Note: If the message appears after reinstalling the supply, then the fuser is defective. Replace the fuser. • Install the missing fuser. For more information on installing the fuser, see the instruction sheet that came with the part. Reinstall missing or unresponsive imaging unit [31.xy] Try one or more of the following: • Check if the imaging unit is missing. If missing, install the imaging unit. For information on installing the imaging unit, see the "Replacing supplies" section of the User's Guide. • If the imaging unit is installed, then remove the unresponsive imaging unit, and then reinstall it. Note: If the message appears after reinstalling the supply, then the imaging unit is defective. Replace the imaging unit. Remove defective disk [61] Remove and replace the defective printer hard disk.