Lexmark MS811 User's Guide - Page 199

Understanding the printer menus Use Portrait Height 3-14.17 inches 76-360 mm Feed Direction Short Edge Long Edge Bin Setup menu Use Output Bin Standard Bin Bin [x] Configure Bins Mailbox Link Mail Overflow Link Optional Type Assignment 199 To Set the portrait height. Notes: • If the height exceeds the maximum, then the printer uses the maximum height allowed. • 14 inches is the US factory default setting. You can increase the height in 0.01‑inch increments. • 356 mm is the international factory default setting. You can increase the height in 1‑mm increments. Specify the feed direction if the paper can be loaded in either direction. Notes: • Short Edge is the factory default setting. • Long Edge appears only when the longest edge is shorter than the maximum width supported in the tray. To Specify the default bin. Notes: • If multiple bins are assigned the same name, then the name appears only once in the menu. • Standard Bin is the factory default setting. Specify configuration options for bins. Notes: • Mailbox is the factory default setting. This setting treats each bin as a separate mailbox. • Link configures all available bins as one large bin. • Mail Overflow configures each bin as a separate mailbox. • Link Optional links all available bins except the standard bin and only appears when at least two optional bins are installed. • Type Assignment assigns each paper type to a bin or linked bin set. • Bins assigned the same name are automatically linked unless Link Optional is selected.