Lexmark MS811 User's Guide - Page 286

Troubleshooting 286 Complex page, some data may not have printed [39] Try one or more of the following: • From the printer control panel, select Continue to ignore the message and continue printing. For non‑touch‑screen printer models, press to confirm. • Cancel the current print job. For non‑touch‑screen printer models, press • Install additional printer memory. to confirm. Configuration change, some held jobs were not restored [57] Held jobs are invalidated because of any of the following possible changes in the printer: • The printer firmware has been updated. • The tray for the print job is removed. • The print job is sent from a flash drive that is no longer attached to the USB port. • The printer hard disk contains print jobs that were stored when the hard disk was installed in a different printer model. From the printer control panel, select Continue to clear the message. For non-touch-screen printer models, press to confirm. Defective flash detected [51] Try one or more of the following: • Replace the defective flash memory card. • From the printer control panel, select Continue to ignore the message and continue printing. For non‑touch‑screen printer models, press to confirm. • Cancel the current print job. Disk corrupted Select Format disk to reformat the printer hard disk and clear the message. For non-touch-screen printer models, press to confirm. Note: Formatting deletes all the files stored in the printer hard disk. Disk full [62] Try one or more of the following: • Select Continue to clear the message and continue printing. For non-touch-screen printer models, press to confirm. • Delete fonts, macros, and other data stored in the printer hard disk. • Install a printer hard disk with larger capacity.