Lexmark MS811 User's Guide - Page 228

Understanding the printer menus Use Print Recovery Page Protect Off On Hibernate Timeout on Connection Do Not Hibernate Hibernate Press Sleep Button Do nothing Sleep Hibernate Press and Hold Sleep Button Do nothing Sleep Hibernate Factory Defaults Do Not Restore Restore Now Custom Home Message Off IP Address Hostname Contact Name Location Zero Configuration Name Custom Text 1 228 To Let the printer successfully print a page that may not have printed otherwise. Notes: • Off is the factory default setting. Off prints a partial page when there is not enough memory to print the whole page. • On sets the printer to process the whole page so that the entire page prints. To set the printer to follow the setting of "Hibernate Timeout" even when an active Ethernet connection exists. Notes: • If "Hibernate Timeout on Connection" is set to "Do Not Hibernate," then the printer never automatically hibernates. • If "Hibernate Timeout on Connection" is set to "Hibernate," then the printer follows the value of the "Hibernate Timeout" setting, except when it is set to Disabled. • "Do Not Hibernate" is the factory default setting. Determine how the printer, while in idle state, reacts to a short press of the Sleep button. Note: Sleep is the factory default setting. Determine how the printer, while in idle state, reacts when you press and hold the Sleep button. Note: "Do nothing" is the factory default setting. Restore the printer settings to the factory default settings. Notes: • Do Not Restore is the factory default setting. Do Not Restore keeps the user‑defined settings. • Restore Now returns all printer settings to the factory default settings except Network/Ports menu settings. All downloads stored in the RAM are deleted. Downloads stored in the flash memory or in the printer hard disk are not affected. Select Custom Home Messages on the printer display. Note: This menu appears only in non‑touch‑screen printer models.