Lexmark MS811 User's Guide - Page 234
Separator Source, Notes, Paper Saver, Paper Saver Ordering, Paper Saver Orientation, Staple Job
View all Lexmark MS811 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 234 highlights
Understanding the printer menus 234 Use Separator Source Tray [x] Manual Feeder Paper Saver Off 2‑Up 3‑Up 4‑Up 6‑Up 9‑Up 12‑Up 16‑Up Paper Saver Ordering Horizontal Reverse Horizontal Reverse Vertical Vertical Paper Saver Orientation Auto Landscape Portrait Paper Saver Border None Solid Staple Job Off On Run Stapler Test Hole Punch On Off To Specify the paper source for separator sheets. Notes: • Tray 1 (standard tray) is the factory default setting. • From the Paper menu, set Configure MP to "Cassette" for Manual Feeder to appear as a menu setting. Print multiple‑page images on one side of a paper. Notes: • Off is the factory default setting. • The number selected is the number of page images that will print per side. Specify the positioning of multiple‑page images when using Paper Saver. Notes: • Horizontal is the factory default setting. • Positioning depends on the number of page images and whether they are in portrait or landscape orientation. Specify the orientation of a multiple‑page document. Note: Auto is the factory default setting. The printer chooses between portrait and landscape. Print a border when using Paper Saver. Note: None is the factory default setting. Specify whether printed output is stapled. Notes: • Off is the factory default setting. • This menu appears only when a supported staple finisher is installed. Print a report that confirms that the staple finisher is functioning properly. Note: This menu appears only when a supported staple finisher is installed. Specify whether holes will be created on printed outputs for the purpose of collecting the sheets in a binder or folder. Notes: • Off is the factory default setting. • This menu appears only when a supported staple, hole punch finisher is installed.