Lexmark MS811 User's Guide - Page 173
Using Hibernate mode, Adjusting the brightness of the printer display, Sleep Button Settings
View all Lexmark MS811 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
Using MS812de 173 Using the printer control panel 1 From the home screen, navigate to: > Settings > General Settings > Timeouts > Sleep Mode 2 In the Sleep Mode field, select the number of minutes you want the printer to wait before it enters Sleep mode, and then touch Submit. Using Hibernate mode Hibernate is an ultra‑low‑power operating mode. When operating in Hibernate mode, the printer is essentially off, and all other systems and devices are turned off safely. Note: The Hibernate and Sleep modes can be scheduled. Using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > General Settings > Sleep Button Settings. 3 From the "Press Sleep Button" or "Press and Hold Sleep Button" drop‑down menu, select Hibernate. 4 Click Submit. Using the printer control panel 1 From the home screen, navigate to: > Settings > General Settings 2 From the "Press Sleep Button" or "Press and Hold Sleep Button" menu, select Hibernate, and then touch Submit. Adjusting the brightness of the printer display To save energy, or if you are have trouble reading from the display, adjust the brightness of the display. Select from 20 to 100. The factory default setting is 100. Using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > General Settings.