Lexmark MS811 User's Guide - Page 204
TCP/IP menu, Network/Ports, Standard Network, TCP/IP, Network [x], Network [x] Setup
View all Lexmark MS811 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
Understanding the printer menus 204 Use Job Timeout 0, 10-225 seconds Banner Page Off On To Set the amount of time it takes for a network print job to be canceled. Notes: • "90 seconds" is the factory default setting. • A setting value of 0 disables the timeout. • If a value between 1 and 9 is selected, then Invalid appears on the display, and the value is not saved. Allow the printer to print a banner page. Note: Off is the factory default setting. TCP/IP menu To access the menu, navigate to either of the following: • Network/Ports > Standard Network > Standard Network Setup > TCP/IP • Network/Ports > Network [x] > Network [x] Setup > TCP/IP Note: This menu is available only in network printers or printers attached to print servers. Use To Set Hostname Set the current TCP/IP host name. Note: This can be changed only from the Embedded Web Server. IP Address View or change the current TCP/IP address. Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that support BOOTP and RARP. Netmask View or change the current TCP/IP netmask. Gateway View or change the current TCP/IP gateway. Enable DHCP On Off Specify the DHCP address and parameter assignment. Note: On is the factory default setting. Enable RARP On Off Specify the RARP address assignment setting. Note: Off is the factory default setting. Enable BOOTP On Off Enable AutoIP Yes No Specify the BOOTP address assignment setting. Note: On is the factory default setting. Specify the Zero Configuration Networking setting. Note: Yes is the factory default setting. Enable FTP/TFTP Yes No Enable the built-in FTP server, which lets you send files to the printer using File Transfer Protocol. Note: Yes is the factory default setting.