Lexmark MX431 Users Guide PDF - Page 22
Setting up fax using a standard telephone line, Using the control panel, Using the Embedded Web Server
View all Lexmark MX431 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Set up, install, and configure 22 • If you do not have a TCP/IP environment, then use the control panel to set up fax. Warning-Potential Damage: To avoid loss of data or printer malfunction, do not touch cables or the printer in the area shown while actively sending or receiving a fax. Using the control panel 1 From the home screen, touch: Settings > Device > Preferences > Run Initial Setup 2 Turn off the printer, wait for about 10 seconds, and then turn on the printer. 3 On the Fax setup screen, configure the settings. 4 Finish the setup. Using the Embedded Web Server 1 Open a web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the web page correctly. 2 Click Settings > Fax > Fax Setup > General Fax Settings. 3 Configure the settings. 4 Apply the changes. Setting up fax using a standard telephone line CAUTION-SHOCK HAZARD: To avoid the risk of electrical shock, do not set up this product or make any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a lightning storm. CAUTION-SHOCK HAZARD: To avoid the risk of electrical shock, do not use the fax feature during a lightning storm.