Lexmark MX431 Users Guide PDF - Page 96
WPA2-Personal, Set PSK, WPA2/WPA, Personal, 1x Encryption Mode
View all Lexmark MX431 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Use printer menus 96 Menu item WPA2-Personal AES* Set PSK WPA2/WPA‑Personal AES* 802.1x Encryption Mode WPA+ WPA2* IPv4 Enable DHCP On* Off IPv4 Set Static IP Address IP Address Netmask Gateway IPv6 Enable IPv6 On* Off IPv6 Enable DHCPv6 Off* On IPv6 Stateless Address Autoconfiguration Off On* IPv6 DNS Address IPv6 Address Prefix 0-128 (64*) IPv6 All IPv6 Addresses Description Enable wireless security through WPA2. Note: This menu item appears only if Wireless Security Mode is set to WPA2-Personal. Set the password for secure wireless connection. Note: This menu item appears only if Wireless Security Mode is set to WPA2/WPA-Personal or WPA2‑Personal. Enable wireless security through WPA2/WPA. Note: This menu item appears only if Wireless Security Mode is set to WPA2/WPA-Personal. Enable wireless security through 802.1x standard. Note: This menu item appears only if Wireless Security Mode is set to 802.1x - Radius. Enable Dynamic Host Configuration Protocol (DHCP). Note: DHCP is a standard protocol that allows a server to distribute IP addressing and configuration information dynamically to clients. Set the static IP address of your printer. Enable IPv6 in the printer. Enable DHCPv6 in the printer. Set the network adapter to accept the automatic IPv6 address configuration entries provided by a router. Specify the DNS server address. Specify the address prefix. Show all IPv6 addresses.