Lexmark X422 X422 MFP Setup Guide - Page 23
Installing an MFP memorycard, Installing an optional flashmemory or font card
View all Lexmark X422 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Installing an MFP memory card Warning: Memory cards are easily damaged by static electricity. Touch something metal on the MFP before you touch a card. 1 Unpack the memory card. Avoid touching the connection points along the edge of the card. 2 Push open the latches on both sides of the memory connector. 3 Align the notches on the card with the notches on the connector. 4 Push the memory card firmly into the connector until the latches on both ends snap into place. 5 Make sure the latch fits over the notch on the end of the card. Note: Some memory options offered for other Lexmark MFPs cannot be used with your MFP. Refer to the publications CD for memory specifications. Installing an optional flash memory or font card Follow the instructions in this section to install an optional flash memory or font card. The system board has one connection location which can support either one flash memory card or one font card. Install optional memory cards 15