Lexmark X422 X422 MFP Setup Guide - Page 9
Step1: Install drivers for local printing and scanning - driver windows 7
View all Lexmark X422 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Step 1: Install drivers for local printing and scanning Note: Use the drivers CD to install your print and scan drivers. Launch the CD and follow the instructions to install MFP software. For local printing and scanning, it is important that you install the drivers for your multifunction printer (MFP) on your computer before you install the actual hardware. A local MFP is an MFP attached to your computer using a USB cable. If your MFP is attached to a network instead of your computer, skip this step and go to Step 2: "Unpack the MFP" on page 5. A print driver is software that lets your computer communicate with your MFP. The procedure to install drivers depends on the operating system you are using. A scan driver is software that lets you acquire and adjust a scan. Again, the procedure to install drivers depends on the operating system you are using. Select your operating system from the following table to find driver installation instructions. Operating system Go to page... Windows Server 2003, Windows 2000, 2 Windows XP, Windows 98, and Windows Me Note: Windows 95 and Windows NT are not supported operating systems. Macintosh 3 UNIX/Linux 4 * For local installation, do not attach a USB cable while your MFP and computer are turned on. Install the drivers first. Install drivers for local printing and scanning 1