Lexmark X422 X422 MFP Setup Guide - Page 52
Printing a network setup Printing a local test Print, Reports, Network Setup - cannot start
View all Lexmark X422 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
6 Verify that the paper trays are configured for the sizes and types of paper you loaded. Printing a network setup page Note: Save the network setup page after it prints. You will use it in the other steps. If the MFP is attached to a network, print a network setup page to verify the network connection. This page also provides important information that helps you configure for network printing. 1 Make sure the MFP is on. 2 Press the administration button and then select Print Reports. 3 Choose Network Setup Page, and then press . The network setup page prints automatically. 4 On the network setup page, confirm that Status is "Connected." If Status is "Not Connected," your LAN drop may not be active or your network cable may be malfunctioning. Consult your network administrator for a solution, and then print another network setup page to verify that you are connected to your network. Printing a local test page Windows If the MFP is attached directly to your computer, print a test page to verify the MFP and computer are communicating properly. 1 From the Start menu, click Settings Æ Printers. 2 From the Printers folder, right-click the icon for your local MFP. 3 Select Properties from the sidebar menu. 4 From the General tab, click Print Test Page. Verify MFP setup 44