Lexmark X422 X422 MFP Setup Guide - Page 50
Verifying the IPsettings, Using the resident Web ping 192.168.0.11 - windows 7
View all Lexmark X422 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Verifying the IP settings Note: On Windows computers, click Start Æ Programs Æ Command prompt (or Start Æ Programs Æ Accessories Æ Command prompt if using Windows 2000 or Windows XP). Note: On Mac OS X, go to /Applications/Utilities and launch Network Utility. Click the tab labeled Ping, enter the IP address of the MFP and click the Ping button. 1 On the Network Setup Page, look under the "TCP/IP" heading and make sure the IP address, netmask, and gateway are what you expected. 2 Ping the MFP and verify that it responds. For example, at a command prompt on a network computer, type ping followed by the new MFP IP address: ping 192.168.0.11 If the MFP is active on the network, you receive a reply. Using the resident Web page Note: Many settings may only be changed using the resident Web page. These settings are signified by an asterisk (*) on the Menu Settings page. Your MFP has a resident Web page, which you can access from your browser. To access the resident Web page, type the MFP's IP address in the URL address field of your browser (for example, http://192.168.236.24). If you do not know the IP address of your MFP, you can find it on the network setup page (for help, see "Printing a network setup page" on page 44). Some of the resident Web page features include a status window of the MFP and details of the MFP's configuration, such as current memory and engine code levels. If you are an administrator, you can also change copy settings, fax settings, e-mail settings, and so on. What do I do next? Task Go to page... After you have configured the MFP for TCP/IP setup, you 47 are ready to install network drivers. Configure for TCP/IP 42