Lexmark X422 X422 MFP Setup Guide - Page 43
Step8: Attach cables, Attaching the telephone cord - driver install
View all Lexmark X422 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Step 8: Attach cables CAUTION: Do not connect or disconnect a communication port, a telephone cord, or any other connector during a lightning storm. The MFP can be attached to a network or directly to a computer to print locally. If the MFP is locally attached, remember to install your drivers first before attaching your cables. See Step 1: "Install drivers for local printing and scanning" on page 1, if you have not already installed the drivers. Attaching the telephone cord 1 Connect the MFP to the telephone jack using the telephone line. 2 Plug one end of the telephone cord into the socket at the back of the MFP and the other end into a telephone jack. Attach cables 35
35
Attach cables
Step 8: Attach cables
CAUTION:
Do not connect
or disconnect a
communication port, a
telephone cord, or any other
connector during a lightning
storm.
The MFP can be attached to a network or directly to a computer to
print locally.
If the MFP is locally attached, remember to install your drivers first
before attaching your cables. See Step 1: “Install drivers for local
printing and scanning” on page 1, if you have not already installed the
drivers.
Attaching the
telephone cord
1
Connect the MFP to the telephone jack using the telephone line.
2
Plug one end of the telephone cord into the socket at the back
of the MFP and the other end into a telephone jack.