Lexmark X422 X422 MFP Setup Guide - Page 49
Step10: Con for TCP/IP, Assigning an MFP IPaddress
View all Lexmark X422 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Step 10: Configure for TCP/IP If you have TCP/IP available on your network, we recommend that you assign an IP address to the MFP. Assigning an MFP IP address If your network is using DHCP, an IP address is automatically assigned after you connect the network cable to the MFP. 1 Look for the address under the "TCP/IP" heading on the network setup page you printed in "Printing a network setup page" on page 44. 2 Go to "Verifying the IP settings" on page 42 and begin with step 2. If your network is not using DHCP, then you must manually assign an IP address to the MFP. An easy way to do this is to use the MFP control panel: 1 Press the administration button and then select Network/USB and then TCP/IP. 2 Change the address by entering the new IP address in the Address field using the numeric keypad. Use the arrow keys to navigate the IP address fields. 3 Enter the appropriate address in the Netmask field using the arrow keys to navigate. 4 Enter the appropriate address in the Gateway field using the arrow keys to navigate. 5 When you are finished, select Submit to return the MFP to the Ready state. 6 Reprint the network setup page to see the new configuration. See "Printing a network setup page" on page 44. 7 Go to "Verifying the IP settings" on page 42. Configure for TCP/IP 41