NEC M40-2-AV M40/46-2 user's manual - Page 35

English OSD Controls - continued HEAT STATUS FAN CONTROL SCREEN SAVER GAMMA BRIGHTNESS MOTION SIDE BORDER COLOR AUTO BRIGHTNESS DVI, VGA, RGB/HV input only CHANGE SECURITY PASSWORD SECURITY LOCK DDC/ CI DISPLAY PROTECTION RESET Displays status of the COOLING FAN, BRIGHTNESS and TEMPERATURE. Note: The M40/M46 does not have FAN 3. Cooling fan reduces the temperature of the display. Use the SCREEN SAVER function to reduce the risk of Image Persistence. The gamma curve becomes narrow, reducing contrast and cutting down the risk of image retention. The brightness is decreased when "ON" is selected. The screen image is slightly expanded and moves in 4 directions (UP, DOWN, RIGHT, LEFT) at user determined intervals. Adjusts the color of the side borders when a 4:3 image is displayed. Press + button, the bar will become lighter. Press - button, the bar will become darker. Adjusts the brightness level according to the input signal. Allows the security password to be changed. Factory preset password is 0000. Locks the security password. ENABLE/ DISEABLE: turn on or off the two way communication and control of the monitor. Resets the following settings within the DISPLAY PROTECTION back to factory setting: POWER SAVE, STANDBY MODE, FAN CONTROL, SCREEN SAVER, SIDE BORDER COLOR, AUTO BRIGHTNESS. ADVANCED OPTION INPUT DETECT All inputs except for TV NONE FIRST DETECT LAST DETECT VIDEO DETECT LONG CABLE ON/OFF VGA and RGB/HV input only LONG CABLE MANUAL VGA and RGB/HV input only Selects the method of input detection the monitor uses when more than two input devices are connected. The Monitor will not search the other video input ports. When the current video input signal is not present, then the monitor searches for a video signal from the other video input port. If the video signal is present in the other port, then the monitor switches the video source input port to the new found video source automatically. The monitor will not look for other video signals while the current video source is present. When the monitor is displaying a signal from the current source and a new secondary source is supplied to the monitor, the monitor will automatically switch to the new video source. When current video input signal is not present, the montor searches for a video signal from the other video input port. If the video signal is present in the other port, then the monitor switches the video source input port to the new found video source automatically. DVD/HD or VIDEO inputs will have priority over DVI, VGA, and RGB/HV. When DVD/HD or VIDEO input signal is present the monitor will change and keep to the DVD/HD or VIDEO input. Compensates for image degradation caused from using a long cable. Manually compensates for image degradation caused from using a long cable. English-31