NEC M40-2-AV M40/46-2 user's manual - Page 42
Interface, Control command diagram
UPC - 805736024913
View all NEC M40-2-AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Using the LCD with RS-232C - continued To control monitor or multiple monitors that are daisy-chained together please use the control command. Instructions for the control command can be found on the CD included with the display. The file is called "External_control.pdf ". 1) Interface PROTOCOL BAUD RATE DATA LENGTH PARITY BIT STOP BIT FLOW CONTROL RS-232C 9600 [bps] 8 [bits] NONE 1 [bit] NONE 2) Control command diagram Please see file "External_Control.pdf " on the CD-ROM. English-38
English-38
Using the LCD with RS-232C
- continued
To control monitor or multiple monitors that are daisy-chained together please use
the control command. Instructions for the control command can be found on the CD
included with the display. The file is called “External_control.pdf”.
1) Interface
PROTOCOL
RS-232C
BAUD RATE
9600
[bps]
DATA LENGTH
8 [bits]
PARITY BIT
NONE
STOP BIT
1 [bit]
FLOW CONTROL
NONE
2) Control command diagram
Please see file “External_Control.pdf” on the CD-ROM.