NEC M40-2-AV M40/46-2 user's manual - Page 36

OSD Controls - continued RED DELAY GREEN DELAY BLUE DELAY RED SHARPNESS GREEN SHARPNESS BLUE SHARPNESS SOG PEAK. VIDEO EQ. RGB/HV input only SYNC TERMINATE RGB/HV input only Adjusts the phase of the red signal. Adjusts the phase of the green signal. Adjusts the phase of the blue signal. Adjusts the performance degradation of the RED signal. Adjusts the performance degradation of the GREEN signal. Adjusts the performance degradation of the BLUE signal. Adjusts the shape of Sync on Green signal. Optimize the shape (Tailing) of RED, GREEN and BLUE signals. Selects the terminate resistance for matching the cable impedance. DVI MODE Choose the DVI mode based on the input device connected via DVI connector. DVI-PC DVI-HD When a PC or similar equipment is connected. When a DVD player is connected. SCAN CONVERSION All inputs except for VGA, RGB/ HV PROGRESSIVE INTERLACE Selects the IP (Interlace to Progressive) conversion function. Note: For DVI input "DVI-HD" needs to be enabled in the DVI mode. Converts interlaced signals to progressive. This is the default setting. Disables IP conversion. This setting is best suited for motion pictures, but increases the risk of image retention. SCART MODE S-VIDEO MODE Input mode for devices using SCART connectors. Selects the S-Video input port function. PRIORITY SEPARATE COLOR SYSTEM VIDEO input only AUTO NTSC PAL SECAM 4.43NTSC PAL-60 When an S-Video cable is connected to the S-Video input, it will have priority over the composite input port. The S-Video port and Composite port can be selected as independent input ports. The selected Color System depends on the video format of the input signal. Automatically chooses Color System setting based on input signal. SCAN MODE HDMI, DVD/HD, VIDEO, TV input only Some video formats may require different scanning modes in order to best display the image. OVER SCAN UNDER SCAN ADVANCED OPTION RESET Image size is larger than what can be displayed. The image edge will appear cropped. Approximately 95% of the image will be shown on the screen Image size stays within the display area. The whole image is displayed on the screen. Resets the following settings within the ADVANCED OPTION menu back to factory setting: INPUT DETECT, LONG CABLE ON/OFF, LONG CABLE MANUAL, DVI MODE, SCAN CONVERSION, S-VIDEO MODE, SCAN MODE. FACTORY RESET Resets OSD options back to factory settings EXCEPT FOR: CHANGE SECURITY PASSWORD and SECURITY PASSWORD. English-32