NEC M40-2-AV M40/46-2 user's manual - Page 41
Functions that can be controlled, via RS-232C are
UPC - 805736024913
View all NEC M40-2-AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
English Using the LCD with RS-232C - continued Functions that can be controlled via RS-232C are: • Powering ON or OFF • Switching input signals NOTE: If your PC (IBM or IBM compatible) is equipped only with a 25-pin serial port connector, a 25-pin serial port adapter is required. Contact your dealer for details. NOTE: In order to function, the RS-232C OUT terminal can only be connected to another monitor of the same model. Do not connect to other types of equipment. This LCD monitor uses RXD, TXD and GND lines for RS-232C control. The reverse type cable (null modem cable) should be used for RS-232C control. Multeos Multeos PC (Out) IN OUT RS-232C (IN) RS-232C Cable RS-232C (OUT) RS-232C (IN) RS-232C Cable RS-232C (OUT) Multeos English-37
English
English-37
This LCD monitor uses RXD, TXD and
GND lines for RS-232C control.
The reverse type cable (null modem cable)
should be used for RS-232C control.
Functions that can be controlled
via RS-232C are:
Powering ON or OFF
Switching input signals
NOTE:
If your PC (IBM or IBM compatible) is equipped
only with a 25-pin serial port connector, a 25-pin serial port
adapter is required. Contact your dealer for details.
NOTE:
In order to function, the RS-232C OUT terminal
can only be connected to another monitor of the same
model. Do not connect to other types of equipment.
•
•
Using the LCD with RS-232C
- continued
PC
(Out)
RS-232C Cable
RS-232C Cable
RS-232C (IN)
RS-232C (OUT)
RS-232C (IN)
RS-232C (OUT)
Multeos
Multeos
Multeos
IN
OUT