Netgear DGND3300v2 DGND3300 Setup Manual - Page 43

Default Configuration, defaults. This is called a hard reset. To perform a hard reset - snmp

Get Netgear DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router PDF manuals and user guides View all Netgear DGND3300v2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Default Configuration You can use the reset button located on the front of your device to reset all settings to their factory defaults. This is called a hard reset. To perform a hard reset, push and hold the reset button for three seconds. Your device will return to the factory configuration settings shown in the table below. Feature Router Login User login URL User name (case sensitive) Login password (case sensitive) Internet Connection WAN MAC address WAN MTU size ADSL line rate Local Network (LAN) Lan IP Subnet mask RIP direction RIP version RIP authentication DHCP server DHCP starting IP address DHCP ending IP address DMZ Time zone Time zone adjusted for daylight saving time SNMP Default Behavior http://www.routerlogin.net or http://www.routerlogin.com admin password Use default address 1458 for Annex A World except NA, 1492 for Annex A NA and Annex B automatically negotiated 192.168.0.1 255.255.255.0 None Disabled None Enabled 192.168.0.2 192.168.0.254 Disabled GMT for Annex A except NA and Annex B; PST for NA. Disabled Disabled Firewall Technical Specifications 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
Technical Specifications
39
Default Configuration
You can use the reset button located on the front of your device to reset all settings to their factory
defaults. This is called a hard reset. To perform a hard reset, push and hold the reset button for
three seconds. Your device will return to the factory configuration settings shown in the table
below.
Feature
Default Behavior
Router Login
User login URL
or
User name (case sensitive)
admin
Login password (case sensitive)
password
Internet Connection
WAN MAC address
Use default address
WAN MTU size
1458 for Annex A World except NA, 1492 for Annex A NA
and Annex B
ADSL line rate
automatically negotiated
Local Network (LAN)
Lan IP
192.168.0.1
Subnet mask
255.255.255.0
RIP direction
None
RIP version
Disabled
RIP authentication
None
DHCP server
Enabled
DHCP starting IP address
192.168.0.2
DHCP ending IP address
192.168.0.254
DMZ
Disabled
Time zone
GMT for Annex A except NA and Annex B; PST for NA.
Time zone adjusted for daylight saving
time
Disabled
SNMP
Disabled
Firewall