Netgear DGND3300v2 DGND3300 Setup Manual - Page 7

Hardware Features Before you install and connect your router, take a moment to become familiar with the front and back panels of the router-especially the LEDs on the front panel. Front Panel The modem router front panel shown below contains status LEDs. Figure 2 1 2 3 4 567 You can use the LEDs to verify various conditions. Table 1 describes each LED. Table 1. LED Descriptions Label LED Activity Description 1. Power Solid green Solid red Off Factory reset Solid green Blinking green 2. LAN Ports Solid amber Blinking amber Off Power is supplied to the router. POST (Power-On Self-Test) failure or device malfunction. Power is not supplied to the router. Lights red momentarily after the reset button is depressed for 6 seconds, then blinks red three times when the reset button is released, and then turns green as the gateway resets to the factory defaults. The local port has detected a link with a 100 Mbps device. Data is being transmitted or received at 100 Mbps. The local port has detected a link with a 10 Mbps device. Data is being transmitted or received at 10 Mbps. No link is detected on this port. Getting to Know Your Wireless Router 3