Netgear FVS318 FVS318 Reference Manual - Page 118
Problems with Date and Time, Reset
UPC - 606449023381
View all Netgear FVS318 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall 1. Turn the firewall off. 2. While pressing the Default Reset button, turn the firewall on. 3. Keep holding the button until the TEST LED turns off (about 10 seconds later), then blinks (about 20 seconds total). Reset Figure 8-1. Using Reset Button 4. Release the Default Reset button and wait for the firewall to reboot. Problems with Date and Time The E-Mail menu in the Content Filtering section displays the current date and time of day. The FVS318 VPN Firewall uses the Network Time Protocol (NTP) to obtain the current time from one of several Network Time Servers on the Internet. Each entry in the log is stamped with the date and time of day. Problems with the date and time function can include: • Date shown is January 1, 2000 Cause: The firewall has not yet successfully reached a Network Time Server. Check that your Internet access settings are configured correctly. If you have just completed configuring the firewall, wait at least five minutes and check the date and time again. • Time is off by one hour Cause: The firewall does not automatically sense Daylight Savings Time. In the E-Mail menu, check or uncheck the box marked "Adjust for Daylight Savings Time". 8-8 Troubleshooting M-10146-01