Netgear FVS318 FVS318 Reference Manual - Page 191
Appendix G NETGEAR VPN Configuration FVS318 or FVM318 with FQDN to FVL328, Configuration Profile
UPC - 606449023381
View all Netgear FVS318 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
Appendix G NETGEAR VPN Configuration FVS318 or FVM318 with FQDN to FVL328 This appendix is a case study on how to configure a VPN tunnel from a NETGEAR FVS318 or FVM318 to a FVL328 using a Fully Qualified Domain Name (FQDN) to resolve the public address of one or both routers. This case study follows the VPN Consortium interoperability profile guidelines (found at http://www.vpnc.org/InteropProfiles/Interop-01.html). The configuration options and screens for the FVS318 and FVM318 are the same. Configuration Profile The configuration in this document follows the addressing and configuration mechanics defined by the VPN Consortium. Gather all the necessary information before you begin the configuration process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and all of the parameters that need to be set on both sides. Check that there are no firewall restrictions. Table G-1. Profile Summary VPN Consortium Scenario: Scenario 1 Type of VPN LAN-to-LAN or Gateway-to-Gateway (not PC/Client-to-Gateway) Security Scheme: IKE with Preshared Secret/Key (not Certificate-based) Date Tested: April 2003 Model/Firmware Tested: NETGEAR-Gateway A FVS318 firmware version A1.4 or FVM318 firmware version 1.1 NETGEAR-Gateway B FVL328 with firmware version 1.4 Release 1A IP Addressing: NETGEAR-Gateway A Fully Qualified Domain Name (FQDN) NETGEAR-Gateway B Static IP address NETGEAR VPN Configuration FVS318 or FVM318 with FQDN to FVL328 G-1 M-10146-01