Netgear FVS318 FVS318 Reference Manual - Page 70

Configuring a SA Using IKE Aggressive Mode

Page 70 highlights

Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall Table 6-1. Security Association Main Mode Configuration Fields Field Pre-Shared Key Key Life IKE Life Time NETBIOS Enable Description Specify the key. Any value is acceptable, provided the remote VPN endpoint has the same value in its Pre-Shared Key field. The default is 3600 seconds (one hour). At the end of this time, the connection will drop, the security association will be re-established, and the connection will be reactivated. The default is 28800 seconds (eight hours). If you need to run Microsoft networking functions such as Network Neighborhood, click the NETBIOS Enable check box to allow NETBIOS traffic over the VPN tunnel. Configuring a SA Using IKE Aggressive Mode Click the VPN Settings link of the Setup section of the main menu, and then click the radio button of a VPN tunnel, and then click the Edit button and choose Aggressive Mode from the Security Association drop-down list to display the Aggressive Mode menu shown in Figure 6-4. Figure 6-4: IKE - VPN Settings Aggressive Mode Configuration Menu 6-6 Virtual Private Networking M-10146-01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222

Reference Manual for the Model FVS318 Broadband
ProSafe VPN Firewall
6-6
Virtual Private Networking
M-10146-01
Configuring a SA Using IKE Aggressive Mode
Click the VPN Settings link of the Setup section of the main menu, and then click the radio button
of a VPN tunnel, and then click the Edit button and choose Aggressive Mode from the Security
Association drop-down list to display the Aggressive Mode menu shown in
Figure 6-4
.
Figure 6-4: IKE - VPN Settings Aggressive Mode Configuration Menu
Pre-Shared Key
Specify the key. Any value is acceptable, provided the remote VPN endpoint has
the same value in its Pre-Shared Key field.
Key Life
The default is 3600 seconds (one hour).
IKE Life Time
At the end of this time, the connection will drop, the security association will be
re-established, and the connection will be reactivated. The default is 28800
seconds (eight hours).
NETBIOS Enable
If you need to run Microsoft networking functions such as Network
Neighborhood, click the NETBIOS Enable check box to allow NETBIOS traffic
over the VPN tunnel.
Table 6-1.
Security Association Main Mode Configuration Fields
Field
Description