Netgear FVS318 FVS318 Reference Manual - Page 87
r>Th4&3@#kB, Con the VPN Client Authentication Proposal. - if used as switch
UPC - 606449023381
View all Netgear FVS318 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall Figure 6-17: Security Policy Editor My Identity • Choose None in the Select Certificate menu. • Select IP Address in the ID Type menu. If you are using a virtual fixed IP address, enter this address in the Internal Network IP Address box. Otherwise, leave this box empty. Use 192.168.100.2 for this example. • In the Internet Interface box, select the adapter you use to access the Internet. Select PPP Adapter in the Name menu if you have a dial-up Internet account. Select your Ethernet adapter if you have dedicated Cable or DSL line. You may also choose Any if you will be switching between adapters or if you have only one adapter. • Click the Pre-Shared Key button. In the Pre-Shared Key dialog box, click the Enter Key button. Enter the FVS318's Pre-Shared Key and click OK. In this example, r>T(h4&3@#kB would entered. Note that this field is case sensitive. f. Configure the VPN Client Authentication Proposal. In this step, you will provide the type of encryption (DES or 3DES) to be used for this connection. This selection must match your selection in the FVS318 configuration. • In the Network Security Policy list on the left side of the Security Policy Editor window, expand the Security Policy heading by double clicking its name or clicking on the "+" symbol. Virtual Private Networking M-10146-01 6-23